API 570 Question Bank (API 570 QB001)

apiXams provides Question Bank freely in this blog to help who is unable to buy. If you visit our blog frequently, you will get new questions regularly. Don't miss this chance, because it will be available  for limited time period after that it will be deleted. So don't forget to visit our blog. If you want to download Complete set of Question Bank with answer immediately, visit to downloads page. Direct download link available on it, remember its not free.

We started from today, you shall save this questions with same Question Bank Code, which is provided each post heading within bracket. Because first we post all questions in this Question Bank then we will post the answers for that particular Question Bank with the same Question Bank Code.

If you missed to save with question bank code, you cannot locate correct answers. So aware and ensure every time while you save the questions for correct question bank code. See below for today's questions.

This is the first Question Bank of free edition. 

1) API 570 covers inspection, repair alteration, and re-rating procedures for metallic piping systems that __________.

a) Are being fabricated

b) Does not fall under ASTM B31.3

c) Have been in-service

d) Has not been tested

2) API 570 was developed for the petroleum refining and chemical process industries.

a) It shall be used for all piping systems.

b) It may be used, where practical, for any piping system.

c) It can be used, where necessary, for steam piping.

d) It may not be used unless agreed to by all parties.

3) API 570 __________ be used as a substitute for the original construction requirements governing a piping system before it is placed in-service.

a) Shall not

b) Should

c) May

d) Can

4) API 570 applies to piping systems for process fluids, hydrocarbons, and similar flammable or toxic fluid services. Which of the following services is not specifically applicable?
a) Raw, intermediate, and finished petroleum products

b) Water, steam condensate, boiler feed water

c) Raw, intermediate, and finished chemical products

d) Hydrogen, natural gas, fuel gas, and flare systems

come again for more...............

Posted in: API 570,API 570 Question Bank,Mock up Questions,Mockup Test,Piping Inspector Exam,Practice Questions,Question Bank,Sample Questions